I recently encountered a Baldwin with similar design and problems. I addressed the problem by filing the hammers to a precise shape, gently massaging the strings up from the underside, followed by careful string fitting and voicing (in this case the hammers required some shoulder needling to open the tone and give a bit more resilience). It took care of the problem very nicely. David Love ----- Original Message ----- From: "gordon stelter" <lclgcnp@yahoo.com> To: <cedel@supernet.com>; "Pianotech" <pianotech@ptg.org> Sent: November 14, 2002 3:59 PM Subject: Re: Nasty Baldwin treble Yes, but at least the noises are more noticeable to the pianist than the audience ( which is usually the case ). Still, I told the music minkster I'd try to remedy it, so all suggestions are gratefully requested. Gordon --- Clyde Hollinger <cedel@supernet.com> wrote: > Gordon, > > I service two of those. I just put up with it, > assuming that's the way > Baldwin wants it to sound. Has the customer > complained? > > Regards, > Clyde > > gordon stelter wrote: > > > I am working on a Baldwin SF grand for a church > with > > all sorts of nasty ringing and "trash" noise in > the > > upper treble where, instead of a normal capo bar, > it > > has those individual bearing "nuggets" ( my > > terminology ) > > Any suggestions? ( on the noises, not my > terminlogy, > > please ) > > Thump > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives __________________________________________________ Do you Yahoo!? Yahoo! Web Hosting - Let the expert host your site http://webhosting.yahoo.com _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC