Renner hammer boring jig and a set of un-bored hammers. Total control and accuracy! Jerry Gravina, RPT Babylon, NY At 05:03 PM 11/11/2002 -0500, you wrote: >Hello, >I am working on a piano that I acquired a few months ago. I have decided to >replace the hammers. They have already been filed and the blow distance >varies quite a bit from hammer to hammer, but is nearly 2" overall. >I am debating whether to order stock hammers or send samples and get a >custom made set. Stock is cheaper, but I am concerned about matching the >angles in the bass and tenor sections. Any advice? >thanks in advance >P. Jenkins >southport > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC