Hi, Folks, >From: "Craig Glasser" <cglasser@hotmail.com> >Reply-To: Pianotech <pianotech@ptg.org> >To: "Sarah Fox" <sarah@gendernet.org>, "Pianotech" <pianotech@ptg.org> >Subject: Re: biz cards >Date: Mon, 11 Nov 2002 14:12:55 -0800 > >I've just had a friend print some cards for me on Avery stock. They came >out wonderfully. You can get rid of the micro-perf. roughness on the edges >easily by taking a stack of about 50 cards, holding them tightly and >sanding >the edges with fine sandpaper or emery cloth. Make sure the sandpaper is >clean. You need only one or two strokes across the surface of the >sandpaper >to get rid of the perf.'s. > >----- Original Message ----- >From: "Sarah Fox" <sarah@gendernet.org> >To: <ilvey@sbcglobal.net>; "Pianotech" <pianotech@ptg.org> >Sent: Monday, November 11, 2002 2:02 PM >Subject: Re: biz cards > > > > Hi David, > > > > I've printed bizillions of business cards. The Avery stock does >look/feel > > different in the sense that the cards have microperforated edges. Most > > people don't notice. Some people do -- and will realize you printed >your > > own cards. If you want more professional results, just use plain 110 lb > > cardstock, which comes in 8.5 x 11 sheets. Print it the same way you >would > > on the Avery sheets. Then cut it apart on a good paper cutter. Set up > > guides on the paper cutter to speed your work. (You RPT guys do lots of > > these sorts of jig setups, so this shouldn't be hard.) You can knock >out >a > > lot of cards rather painlessly, and they look professionally printed, so > > long as you use a good quality/resolution of printer capable of doing >snazzy > > graphics. You'll pay only a fraction of the cost in materials. > > > > Peace, > > Sarah > > > > > > ----- Original Message ----- > > From: "David Ilvedson" <ilvey@sbcglobal.net> > > To: <pianotech@ptg.org> > > Sent: Monday, November 11, 2002 2:22 PM > > Subject: biz cards > > > > > > > Hey List, > > > > > > I am thinking of making my own biz cards. I have used the Home Office >the > > last few times and the cards are fine, but I'm > > > thinking of a little more creativity. I'm looking at Avery stock and >have > > a color ink jet. Anyone do this? Do they look like > > > biz cards, i.e. feel the same? Do I have too much time on my hands? > > > > > > David Ilvedson, RPT > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives _________________________________________________________________ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail
This PTG archive page provided courtesy of Moy Piano Service, LLC