Been following this thread............care to share the method???? Terry Farrell ----- Original Message ----- From: "David Andersen" <bigda@gte.net> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, November 04, 2002 5:02 PM Subject: Re: reamming Agraffes > >I'm cleaning a set from an old M&H. > > > >The brass is so soft that even the slightest pressure has the tool digging > >deeply into the metal. > >Is burrs can easily be carved off with an Exact knife, it's so soft. > > > >I'd like to just replace them but the threads mic' at .280" (9/32). > > > >Stuck between a rock and a soft place... > >Regards, > > > >Jon Page, piano technician > >Harwich Port, Cape Cod, Mass. > > Hi Jon----my friend Brian Alexander (76251.2664@compuserve.com) has a > good method. Talk to him. > > David Andersen > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC