Kneeboard Fabrication

[Farrell]

Someone suggested using MDF instead of plywood for acoustic reasons. I just put a piece of MDF atop my new 5' x 8'+ very-flat soundboard table. I cut the top out of a 5' x 10' piece of MDF. At many smaller lumber yards, they will have to order it for you.

Terry Farrell
  
----- Original Message ----- 
From: "Philip Jamison" <mortier@netreach.net>
To: <pianotech@ptg.org>
Sent: Sunday, November 03, 2002 9:30 PM
Subject: Kneeboard Fabrication


> Good ideas about kneeboard making. Thanks! I didn't know plywood came in the
> 5' width. The cloth panel is also a good idea. As to why they got lost: I
> was told that the students were using them as coffee tables!
> 
> Philip Jamison
> West Chester, PA
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives