I was more curious about the connection you make between "bobbling" and the Ratio. What exactly was causing the bobbling in your determination ? RicB David Love wrote: > I'm not sure how much you want me to go into it, the point was that the > relatively low ratio demanded regulation specs that were beyond what the > pianist would accept--I would have had to increase the dip substantially. > David Love wrote: > > >The piano I mentioned above which had a ratio of 5.3 and high zone SW's was > regulated at 10mm dip/44 mm blow. > >It was bobbling all over the place. The dip required to solve the problem > was > not acceptable to the pianist. > > Would you mind going into this in a little more detail ? > -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC