----- Original Message ----- From: "Wayne Hohle" <wayne.hohle@sympatico.ca> To: <pianotech@ptg.org> Sent: May 25, 2002 5:10 AM Subject: Re: Recrowning the soundboard,something different > > p.s. is there really 20 tons of pressure on the soundboard or is that on the > frame and the pressure at downbearing at the bridge is something different > That's overall string tension on the plate. String downforce against the bridge varies from approximately nothing on a collapsed board with no string bearing up to, perhaps, 1,000 lbs (450 kgf) on a freshly installed board with strong string bearing. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC