You might try heating the reamer. Greg Newell At 06:38 PM 5/28/2002, you wrote: >Hi List, >I have been using the Jack Spring Hole Reamer, with limited success. >The jack springs are held in place by an extremely hard white glue. I still >have a few holes, which resist the reamers action. >Has anyone any suggestions? I feel the problem is to do with the glue. It is >a Young-Chang. Is it a thermal glue? >Thanking you in advance. >Best regards, >John M. Ross >Windsor, Nova Scotia. >jrpiano@win.eastlink.ca Greg Newell mailto:gnewell@ameritech.net
This PTG archive page provided courtesy of Moy Piano Service, LLC