Won't shimming or larger pins make a crack spread wider, making the problem worse? Is this why glue may be better? Is glue only useful for a cracked plank? Or also for enlarged holes? Scott ----- Original Message ----- From: "baoli liu" <baoli_liu@yahoo.com> To: <pianotech@ptg.org> Sent: Friday, 24 May 2002 6:09 Subject: Re: Tunings stability problem > Hi Ron, > > If you continue to find loosed tuning pins,you'd > better check if pin block is cracking. > > Shimming with sandpaper is one way to kill loosed > pins. replacing the original tuning pins with larger > ones or using CA glue also works well. > > Of course,pin block must be supported from underneath > while you replace pins or doing the shimming work to > prevent pinblock cracking. > > Baoli
This PTG archive page provided courtesy of Moy Piano Service, LLC