Hi Greg, Most times on a vertical, you can punch them straight thro' with a nail that has had the tip ground off. Use medium CA glue to fill the hole, and drill the correct sized hole for the new wire. Roger At 04:45 PM 5/15/02 -0700, you wrote: >I have a client with an old upright. Upon first inspection, I found that >there was one backcheck missing. I located it in the bottom of the piano >(along with things better left unspoken here) and it appears to me that >the backcheck is the screw in type. However, there is only a fraction of >one thread left on the wire, which means to me that the wire has somehow >snapped off the wippen and the rest is still imbedded therein. So... any >great suggestions on how I might best extract that little portion of >backcheck wire from the wippen before installing a new one? > >Thanks > >Greg Casper >San Jose, CA >
This PTG archive page provided courtesy of Moy Piano Service, LLC