Touchweight Metrology Question

Richard Brekne richard.brekne@grieg.uib.no
Wed, 15 May 2002 20:26:00 +0200


Baldwin Yamaha Piano Centre wrote:

> Hi Terry,
>                  Back to the original heavy touch. Balance rail hole
> fitting, has a huge effect on feel. Yamaha tends to have tight balance rail
> hole fitting.
> Two suggestions before you start. 1. Polish all key pins and coat with
> protech. 2.Fit the balance rail holes to the pin. Down in humid swamp land,
> there should be a big difference.
>
> Regards Roger
>

Very good friction point Roger ! :)

--
Richard Brekne
RPT, N.P.T.F.
Bergen, Norway
mailto:rbrekne@broadpark.no
http://home.broadpark.no/~rbrekne/ricmain.html




This PTG archive page provided courtesy of Moy Piano Service, LLC