----- Original Message ----- From: "Richard Brekne" <Richard.Brekne@grieg.uib.no> To: <pianotech@ptg.org> Sent: Sunday, May 12, 2002 10:36 PM Subject: Re: double flange action replacement > Rani wrote: > > > > > I thought maybe some one that already has done this will save me a bit of my > > time and efforts. > > > > I will still appreciate if somebody has replaced the entire double flange > > action can share his knowledge > > > > Many thanks > > > > Rani Nir > > Might I inquire as to why you are changing the action design ? The double flange > is certainly a workable configuration. > > > -- > Richard Brekne > RPT, N.P.T.F. > Bergen, Norway > mailto:rbrekne@broadpark.no > http://home.broadpark.no/~rbrekne/ricmain.html > > Thank you Richard Normally you are right, but the parts here are worn and damaged. Wippens are broken so that the spoons are turning despite of a lot of epoxy glue. Anyway it's a question of buying all the action parts to the original action or fitting in a S&S K action or Renner action. >
This PTG archive page provided courtesy of Moy Piano Service, LLC