---------------------- multipart/alternative attachment In a message dated 5/10/2002 7:20:17 AM Pacific Standard Time, Erwinspiano@AOL.COM writes: > Subj:Re: Bandsaw blade width for pinblocks > Date:5/10/2002 7:20:17 AM Pacific Standard Time > From:<A HREF="mailto:Erwinspiano@AOL.COM">Erwinspiano@AOL.COM</A> > Reply-to:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> > To:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> > Sent from the Internet > > > > In a message dated 5/9/2002 5:46:28 PM Pacific Standard Time, > jonpage@attbi.com writes: > > David > I use my sawz all for this cut > >>>>>>Dale>>>>.... > I reposted this so it doesn't appear that I'm a complete idiot today. > >> .. >> A jig saw is needed to cut straight in at the break unless you have a wide >> clearance on your bandsaw. >> >> Regards, >> > ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/02/26/67/93/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC