---------------------- multipart/alternative attachment At 04:15 PM 5/9/2002 -0700, you wrote: >What would you all say is the optimum band saw width for rough cutting the >pin block to shape it to the flange. Wider gives a more stable cut, but >is less easy to turn. > >David Love At least a 1/2" resaw blade. Cut the long, straight lines first and then tend to the curves. A jig saw is needed to cut straight in at the break unless you have a wide clearance on your bandsaw. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@attbi.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ac/a2/40/cb/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC