This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment claudia, please send me a post so that I can send you some information off list. Your address for some reason does not go through for me. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Claudia Cimenti=20 To: pianotech@ptg.org=20 Sent: Wednesday, May 08, 2002 2:14 AM Subject: Re: Used hammers for upright piano project Hi Terry, I'm in Massachusetts. I am sensitive to the fact that I am currently running up quite a bill = getting a bunch of basic tools. Also, I would not mind the practice = reshaping and replacing hammers once before putting on brand-new ones. I = have much to learn. Thanks for the tip about restringing the bass. The stings are indeed = in pretty poor shape. I would rather call them tarnished than corroded, = but I am convinced that does not do well for the tone.=20 The Leland has 85 keys, keys 1-10 are single wound and keys 11-28 are = double wound. Thanks for checking into this. I truly appreciate it. Regards, /Claudia At 04:48 PM 5/7/2002 Tuesday, you wrote: Hello Claudia. I have a complete upright action that I've been = tripping over in my shop for the past few weeks. It is from a 1920s = Starr upright (the piano I learned to tune on - or almost anyway). It is = in good to excellent condition for it age. I'm quite sure the hammers = have most of their felt. I would encourage you to put new hammers on your piano. If the board = and bridges are in acceptable shape, simply restringing the bass can do = wonders for an old beater. Soundwise, new bass strings and new hammers = will often get you 70% or 80% of the way back to how the piano sounded = 80 years ago (what I mean, is biggest bang for the buck). If you think you really want to use used hammers, let me know how = many bass notes your piano has and I'll see what I have. What neck of the woods are you located? Terry Farrell Tampa, Florida mfarrel2@tampabay.rr.com =20 ----- Original Message -----=20 From: "Claudia Cimenti" <claudia_cimenti@mail.com> To: <pianotech@ptg.org> Sent: Tuesday, May 07, 2002 5:52 PM Subject: Used hammers for upright piano project > Hi, >=20 > I am trying to restore a vintage upright to playing condition, for = purely=20 > educational purposes. >=20 > I need to replace the hammers. Most hammers are worn down to the = underfelt! >=20 > I was wondering if someone on this list might have a used set of = upright=20 > hammers available that they would want to part with. I really do = not want=20 > to spend $130+ for a brand new set of hammers for this old piano = at this=20 > point. It would be ok if the hammers are worn, need reshaping, = have no or=20 > broken shanks, etc, etc. The striking distance was nearly = imposssible to=20 > even guess, but I venture it was 2 3/8 ". >=20 > Please feel fee to Email me personally at claudia_cimenti@mail.com = if you=20 > can think of something. >=20 > Thank you very much!! > /Claudia >=20 > PS: I hope that with this post I did not overstep the focus of = this list.=20 > If so, please accept my apologies. /C >=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/10/0d/59/44/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC