---------------------- multipart/alternative attachment Claudia, Back when I was starting out I was lucky enough to find a few people who were leaving the business for one reason or another. I was able to purchase their tools and supplies for a fraction of the cost of new. Helped the, Helped me. Food for thought. Greg Newell At 04:14 AM 5/8/2002, you wrote: >Hi Terry, > >I'm in Massachusetts. > >I am sensitive to the fact that I am currently running up quite a bill >getting a bunch of basic tools. Also, I would not mind the practice >reshaping and replacing hammers once before putting on brand-new ones. I >have much to learn. > >Thanks for the tip about restringing the bass. The stings are indeed in >pretty poor shape. I would rather call them tarnished than corroded, but I >am convinced that does not do well for the tone. > >The Leland has 85 keys, keys 1-10 are single wound and keys 11-28 are >double wound. > >Thanks for checking into this. I truly appreciate it. > >Regards, >/Claudia > > >At 04:48 PM 5/7/2002 Tuesday, you wrote: >>Hello Claudia. I have a complete upright action that I've been tripping >>over in my shop for the past few weeks. It is from a 1920s Starr upright >>(the piano I learned to tune on - or almost anyway). It is in good to >>excellent condition for it age. I'm quite sure the hammers have most of >>their felt. >> >>I would encourage you to put new hammers on your piano. If the board and >>bridges are in acceptable shape, simply restringing the bass can do >>wonders for an old beater. Soundwise, new bass strings and new hammers >>will often get you 70% or 80% of the way back to how the piano sounded 80 >>years ago (what I mean, is biggest bang for the buck). >> >>If you think you really want to use used hammers, let me know how many >>bass notes your piano has and I'll see what I have. >> >>What neck of the woods are you located? >> >>Terry Farrell >>Tampa, Florida >>mfarrel2@tampabay.rr.com >> >>----- Original Message ----- >>From: "Claudia Cimenti" <claudia_cimenti@mail.com> >>To: <pianotech@ptg.org> >>Sent: Tuesday, May 07, 2002 5:52 PM >>Subject: Used hammers for upright piano project >> >> >> > Hi, >> > >> > I am trying to restore a vintage upright to playing condition, for purely >> > educational purposes. >> > >> > I need to replace the hammers. Most hammers are worn down to the >> underfelt! >> > >> > I was wondering if someone on this list might have a used set of upright >> > hammers available that they would want to part with. I really do not want >> > to spend $130+ for a brand new set of hammers for this old piano at this >> > point. It would be ok if the hammers are worn, need reshaping, have no or >> > broken shanks, etc, etc. The striking distance was nearly imposssible to >> > even guess, but I venture it was 2 3/8 ". >> > >> > Please feel fee to Email me personally at claudia_cimenti@mail.com if you >> > can think of something. >> > >> > Thank you very much!! >> > /Claudia >> > >> > PS: I hope that with this post I did not overstep the focus of this list. >> > If so, please accept my apologies. /C >> > ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e1/4a/f3/12/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC