Hey there all you ETD users.. I have found a potential problem that I want all your thoughts on. The last week or so I have had my trusty laptop out for some experimention with Tunelab and it seems like there is quite often a difference between reading a notes partial when played normally, and reading that same partial when playing with the fingernail half-muting the string to accent the partial. Further it seems like the latter is the more accurate of the two. Anyone else ever notice this or have an explanation for this. It seems most prevalaint from about 1500 hz upover. The problem also seems to be lessened a bit when muting off the duplex lengths... tho I still can note different readings when half-muting and not. In all cases so far usual play results in a lower frequency then half-muting the same partial. Thoughts ? -- Richard Brekne RPT, N.P.T.F. Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC