This gives me an idea with what to do with a left over Damp Chaser Heater bar I happen to have... Heat always helps this process and it wouldnt be much trouble at all to use the Heater bar to heat up a "wet cloth rail" ..... could even make one complete with damper wire holes for grand dampers... "D.L. Bullock" wrote: > Let the dampers soak against the hot wet rags for > 15 minutes and check them. If the rags are wet enough, they will have > soaked all the way through to the wood blocks without getting any other > parts of the action wet. You should be able to slide the felts around on > the slimy wood at this point. If they are not yet there, then rewet the > rags in hot water and soak some more. > > D.L. Bullock > www.thepianoworld.com > St. Louis -- Richard Brekne RPT, N.P.T.F. Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC