---------------------- multipart/alternative attachment In a message dated 05/05/2002 6:24:02 PM Eastern Daylight Time, Tunapiana440@cox.net writes: > I have had very good success on hard damper felts simply by squeezing & > "massaging" them with my fingers. Usually if that doesn't work I replace > them. As for sandblasting, doesn't sand get embedded into the felt? I > suppose if I run into a 'candidate' for experimenting I will try it. What > air pressure settings, etc? > > Thanks, > Greg > Greg, I blow the action out after blasting. Around 50 - 60 pounds is usually a good pressure. Hazen Bannister ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/aa/f6/85/de/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC