About $110 for a single and $210 for a double. Terry Farrell ----- Original Message ----- From: <Erwinspiano@AOL.COM> To: <pianotech@ptg.org> Sent: Friday, May 03, 2002 9:23 PM Subject: Re: Pinblocks... Jim B. > In a message dated 5/3/2002 1:10:46 PM Pacific Standard Time, > mfarrel2@tampabay.rr.com writes: > > > > Subj:Re: Pinblocks... Jim B. > > Date:5/3/2002 1:10:46 PM Pacific Standard Time > > From:<A HREF="mailto:mfarrel2@tampabay.rr.com">mfarrel2@tampabay.rr.com</A> > > Reply-to:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> > > To:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> > > Sent from the Internet > > > > Hi Terry > > Say what does a single or double panel of Delignit cost any way? > >>>>Dale >>>>> > > > > > Hi Brian. I bought a Delignit block just to have it for projects, etc. > > (bass bridges, etc.) - a nice flat strong piece of wood (well, mostly > > wood). I was suprised when inspecting it closely, that the glue lines are > > really quite thin. I'll bet easily over 90% of the volume is wood - > > European Beech, I think. Maybe someday I'll make a pinblock out of one of > > them. It doen't look too scary - besides, if it turns out bad, I can blame > > the material! > > > > Terry Farrell > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC