Quiet table saws

[Greg Newell]

I confess, I'm a bit of a tool nut. Thanks!

Greg

Phillip Ford wrote:

> You were the Greg, and I'm glad to hear it.
>
> By the way, nice saw.  I'm jealous.
>
> Phil F
>
> On Thu, 02 May 2002 23:50:23 -0400 Greg Newell <gnewell@ameritech.net> wrote:
>
> No offense here Phillip. If I'm even the Greg of whom you speak.
>
> Phillip Ford wrote:
>
> > Terry,
> > I was just ribbing him a little bit.  I've exchanged posts with Greg before
> > and had the impression that he was a big boy that could take a little
> > ribbing.  If I have offended him (as I obviously have you) my apologies to
> > Greg and to you.  I'll try to limit myself in future to good, tactful, and
> > constructive posts although that may severely limit their number as I have
> > little good to say, even less that's constructive, and tact is almost out
> > of the question.
> >
> > You're Welcome.
> >
> > Phil Ford
> >
> > >From: "Farrell" <mfarrel2@tampabay.rr.com>
> > >To: <pianotech@ptg.org>
> > >Subject: Re: Quiet table saws
> > >Date: Thu, 2 May 2002 19:08:51 -0400
> > >X-Mailer: Microsoft Outlook Express 5.50.4807.1700
> > >X-MIME-Autoconverted: from quoted-printable to 8bit by bridget.rudoff.com
> > >id RAA01656
> > >Sender: owner-pianotech@ptg.org
> > >Reply-To: pianotech@ptg.org
> > >
> > >Excuse me, I am biting my tongue very hard at the moment. This person has
> > >a nice saw. Why on earth would you feel the need to try and belittle him?
> > >He may have other very good applications for the saw he chose that may
> > >well go far beyond trimming piano hammers (maybe not, who cares?).  Why
> > >would one take a constructive and informative post and try an belittle
> > >someone? If you do not have anything good to say, and lack the tactfulness
> > >to be constructive about it, please consider refraining from making such a
> > >post. Thank you.
> > >
> > >Terry Farrell
> > >
> > >----- Original Message -----
> > >From: "Phillip Ford" <fordpiano@earthlink.net>
> > >To: <pianotech@ptg.org>
> > >Sent: Thursday, May 02, 2002 6:04 PM
> > >Subject: Re: Quiet table saws
> > >
> > >
> > > >
> > > > Let's see. A $2000 saw so that you can cut down hammers a little
> > > > more quietly. That makes sense.
> > > >
> > > > Phil F
> > > >
> > > >
> > > > Date: Thu, 02 May 2002 15:58:22 -0400
> > > > From: Greg Newell <gnewell@ameritech.net>
> > > > Organization: Greg's piano Forté
> > > > X-Mailer: Mozilla 4.77 [en] (Windows NT 5.0; U)
> > > > X-Accept-Language: en
> > > > To: pianotech@ptg.org
> > > > Subject: Re: Quiet table saws
> > > > Sender: owner-pianotech@ptg.org
> > > > Reply-To: pianotech@ptg.org
> > > >
> > > > David,
> > > > I would try those link belts and maybe encase the base
> > > > with some plywood designing in some dust collection. Don't forget about a
> > > > sharp and well balanced blade. In absence of all that you could just buy
> > > > a different saw. I have a 5 HP Unisaw w/ 3 belts driving the blade
> > > > and it is pretty darn quiet.
> > > >
> > > > Greg
> > > >
> > > > David Love wrote:
> > > > Mine is not a Unisaw, it is
> > > > a 10" bench saw. It's always been loud.
> > > > David Love
> > > >
> > > > ----- Original Message -----
> > > > From: <a href="mailto:gnewell@ameritech.net">Greg Newell</a>
> > > > To: <a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a>
> > > > Sent: May 02, 2002 12:19 PM
> > > > Subject: Re: Quiet table saws
> > > > David,
> > > > I have a Delta Unisaw and it's very quiet. Could
> > > > it be your is in disrepair?
> > > >
> > > >
> > > > Greg
> > > >
> > > >
> > > > David Love wrote:
> > > > Is there such a thing as a quiet table saw. I do a lot of
> > > > hammer work on the table saw and would love to have a quiet(er) one than
> > > > the little Delta model I have. David
> > > > Love
> > > > --
> > > > Greg Newell
> > > > <a href="mailto:gnewell@ameritech.net">mailto:gnewell@ameritech.net</a>
> > > >
> > > > --
> > > > Greg Newell
> > > > <a href="mailto:gnewell@ameritech.net">mailto:gnewell@ameritech.net</a>
> > > >
> > > >
>
> --
> Greg Newell
> mailto:gnewell@ameritech.net

--
Greg Newell
mailto:gnewell@ameritech.net