If you are ready to put in a new pinblock - absoultely, go for it! If you don't really want to and the old block is not delaminating significantly, you may want to consider just plugging the old block with 1/2" pinblock plugs - makes the old block good as new and you don't have to monkey with fitting, drilling screw holes, etc. - real handy if you don't have a band saw and prefer not to do a new block. But, like I say, if a new block is something you want to experience, then by all means do it to it! Terry Farrell ----- Original Message ----- From: "Patricia Neely" <pneely@citlink.net> To: <pianotech@ptg.org> Sent: Friday, May 03, 2002 2:53 PM Subject: Re: Pinblocks > Greetings everyone I 've been following the pinblock with interest , what > advice would you give for a person doing their first pinblock ( This is my > own piano 1927 baby grand wurlitzer. Pat Neely > ----- Original Message ----- > From: "Joseph Garrett" <joegarrett@earthlink.net> > To: <pianotech@ptg.org> > Sent: Friday, May 03, 2002 11:19 AM > Subject: Pinblocks > > > > All, > > I've been using Delignet pretty much since it was introduced. I find it to > > be more than adequate for any piano. I have used the cheaper Maple pin > > blocks from Apsco and didn't like their inconsistency. I tried one Bolduc > > pin block and didn't like the way it responded, either. But that's just > me, > > I guess. I have heard many technicians espouse the virtues of the Bolduc > pin > > blocks. Personally, I prefer the consistency of the Delignet blocks. > > As an aside, if anyone has scrap pinblock material they would like to > > dispose of, please contact me off-list. I need as much as I can get. > Thanks > > Best Regards, > > Joe Garrett, RPT, (Oregon) > > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC