You might want to consider a tabel saw and the Bill Spurlock hammer taping jig: http://www.spurlocktools.com/id35.htm I have not used this myself, but have heard very good things from others about it. If you have a table saw, it might just be the best way to go! Terry Farrell ----- Original Message ----- From: "Isaac OLEG SIMANOT" <oleg-i@wanadoo.fr> To: "Pianotech Mailing list" <pianotech@ptg.org> Sent: Thursday, May 02, 2002 5:01 PM Subject: Large disk sander > Hello, > > I am lurking trying to find a large disk sander mounted on a table. > > With a $400 budget, is it enough ? > > For hammer thinning, what speed and grain will you consider ? > > Thanks > > Isaac OLEG > > PianoTech > 19 rue Jules Ferry > 94400 VITRY sur SEINE > FRANCE > tel : 033 01 47 18 06 98 > fax : 033 01 47 18 06 90 > cell: 06 60 42 58 77
This PTG archive page provided courtesy of Moy Piano Service, LLC