While I have no doubt this is best, I strung an Estey microgrand a while back that came to me with no strings. David Sanderson worked with only my measured speaking lengths and hitch-pin to forward bridge pin measurements to develop a new scale for the instrument. I was extremely pleased with the results. Terry Farrell ----- Original Message ----- From: "Newton Hunt" <nhunt@optonline.net> To: <pianotech@ptg.org> Sent: Wednesday, May 01, 2002 7:22 AM Subject: Re: Hazen's Question re. rescaling/liking/knowing. > > One of the main factors of Scaling an existing piano, is that the scaler HAS > > to evaluate what is on the piano, originally, and determine the INTENT of > > the DESIGNER. To arbitrarily change things to get what you think the piano > > should be, without this consideration is ludicrous IMHO. > > Thank you Joe, you write so well for me. I wish I had said that, for it is > quite true especially in that changing the overall tension of the piano is > hazardous at best. > > Newton
This PTG archive page provided courtesy of Moy Piano Service, LLC