Piano tuner haters 2

[Joe And Penny Goss]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
And don't you just love the case style of the new "upright grand" hat =
has the hinge at  the edge of the bass and a looooooooooooong hinge pin =
requiring the piano be pulled out from the wall a foot and a half to be =
tuned.
Joe Goss
imatunr@srvinet.com
www.mothergoosetools.com
  ----- Original Message -----=20
  From: HazenBannister@cs.com=20
  To: pianotech@ptg.org=20
  Sent: Saturday, March 30, 2002 8:11 PM
  Subject: Re: Piano tuner haters 2


  Hi list,=20
   I wonder if most of the piano makers put the lid prop,on a grand, =
where they did on purpose,to make it impossible to get a good hammer =
angle while tuning.It's easy going till the last octave,trying to tune =
around the lid prop.(especially in a church where the piano is boxed =
in,and the treble end is against a wall).=20
  Good tuning,=20
  Hazen Bannister=20

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/41/1f/32/e8/attachment.htm

---------------------- multipart/alternative attachment--