Here is another good way... Cover the steel with black plastic electrical tape on both sides. Been doing this for years and works fine. Dick RPT MT ----- Original Message ----- From: "Dave Nereson" <dnereson@dimensional.com> To: <pianotech@ptg.org> Sent: Friday, March 01, 2002 1:14 AM Subject: Re: Clean piano > > ----- Original Message ----- > From: Dave Nereson <dnereson@dimensional.com> > To: <pianotech@ptg.org> > Sent: Friday, March 01, 2002 12:52 AM > Subject: Re: Clean piano > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC