---------------------- multipart/alternative attachment In a message dated 6/3/2002 7:16:59 PM Pacific Standard Time, gnewell@ameritech.net writes: > Subj:Re: Water-Base Laquer > Date:6/3/2002 7:16:59 PM Pacific Standard Time > From:<A HREF="mailto:gnewell@ameritech.net">gnewell@ameritech.net</A> > Reply-to:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> > To:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> > Sent from the Internet > > Gregg ,Terry Thanks for the replys. This seems to echo a concensus. For this process I think I'll stick with the nasty stuff as you all are. We strip outside when possible with plenty of air and protection. Dale Erwin > > Dale, > I tried the water based strippers a few times and was disappointed > with the results every time. I remember hearing / being told that it was a > one coat application and even though you had to wait a lengthy amount of > time before you took it off, it would all come off in one coat. Well ... > not so in my experience. I had tried some of it on a main lid and it was so > soggy by the end of the wait time that the edge veneer came off with the > varnish. I was more than slightly disappointed. I've never had that happen > with regular stripper. I was all for it if it would truly remove everything > in one coat but it did not. The regular Toluene stripper did a better job > and at a much faster rate. My 2 cents! > > Greg > > ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d0/7b/3b/e6/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC