I made an overhead drill press on a track with a small Sears drill press. Pictures available. Works excellent, nothing to set up - just roll the piano under it and start drilling. Terry Farrell ----- Original Message ----- From: "Matt Wynne" <ptuner@optonline.net> To: <pianotech@ptg.org> Sent: Monday, July 08, 2002 12:01 PM Subject: pinblock drill press > Hi All, > > Can anyone recommend a currently available brand/type of drill press > suitable for drilling pinblocks in the piano. The ones I've been seeing > around here don't seem like they are adaptable enough to do the job. > > Thanks, > Matt > >
This PTG archive page provided courtesy of Moy Piano Service, LLC