-----Original Message----- From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of Brian Trout Sent: 23 janvier, 2002 09:32 To: pianotech@ptg.org Subject: Re: Soundboard Press Regarding indexing and locating and holding ribs in their proper position for glueup to the soundboard:<<snip>> When I glue the ribs to the panel, I will use the part that I cut away during feathering and clamp that over the rib. Brian T. When feathering, I stop just about 1/2" from the end just so that I don't have to clamp that piece of wood to the rib. After gluing the board, just use a kerf saw to finish the feathering and I'm done. This saves a little trouble. Marcel Carey, RPT
This PTG archive page provided courtesy of Moy Piano Service, LLC