Joe, Are you getting my posts? I can get it for you if you like. BTW the stroke sander is yours if you want it. Greg Joseph Garrett wrote: > Terry, > Thanks for the sites. The first one was "Wholesale/truckloads only". I have > emailed the second on the chance they may be of help. I am looking for 6/4 > or larger, as I have some 4/4, but have to glue to dimension in order to > turn a decent dowel of correct size. (real pain & grain is never quite > right). I don't do threads very often, but when needed, it's a pain, so > getting some in stock is my aim. Probably don't need more than 10 BF at this > time, which is the "rub" for most of the sites. :-( > Much thanks for the help all! > Regards, > Joe Garrett, RPT, (Oregon) > P.S. > Probably should go to the Nursery and get some seedlings! <G> -- Greg Newell mailto:gnewell@ameritech.net
This PTG archive page provided courtesy of Moy Piano Service, LLC