At 11:40 AM 2/24/2002 -0500, you wrote: >Allen: >Reiinstalling the old damper wires. There are deep, deep marks from the >screws being too tight. I am going to again do a little filing on the >indentation and I also wonder if the screws may have "flatten" the round wire >a bit at this spot. I will know after a while. I also now wonder since I have >screwed up the old damper wires with 0000 steel wool can I salvage these >wires and polish up the scratches with the scotch guard ? >Thanks >Tommy Black >Decatur, Ala. it's not the end of the world. Polish the wires with wax and white Scoth-Brite if you can find it. any wood working supplier would carry it. Check the web. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@attbi.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC