---------------------- multipart/alternative attachment In a message dated 2/17/02 8:52:54 PM !!!First Boot!!!, calexste@yahoo.com writes: > I'm working on a late 1980's era Baldwin spinet. It seems to have been > subjected to some excessive humidity at some point in its life, but is in > pretty good shape. Some of the hammers in the bass section have > butterflied (there are no staples in these hammers). My question is, short > of removing the action, is there any efficient way to glue and clamp these > back together? (this piano belongs to my sister in-law, and I have limited > time to work on it). Preferred glues? > > Thanks for any help! > > -Court Stewart > > > > Medium viscosity CA glue, and vice grips. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f9/a7/d8/56/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC