This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Ok, I put new nuts and screws on and it still is wobbly though not as = much. When I shake it, it sounds as if there is a rod loose in one of = the posts. Being a H style leg, am I going to find a couple of nuts to = tighten if I remove the leg? The owner thought they were smooth on top = when off. Or maybe there's a tensioner nut under the caster? There are = rectangular blocks with one rounded corner, one per leg, attached to the = bottom of the case that pivot about a screw and wedge the leg against = the studs. Is that just an installation/removal aid? Doesn't seem to = have much of a purpose after tightening up the nuts. They were 5/16" = studs. And Bob, did the Estey you saw have nice lyre support rods? Keith R. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c0/18/72/83/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC