---------------------- multipart/alternative attachment In a message dated 12/19/02 12:13:58 AM !!!First Boot!!!, mcpiano@globetrotter.net writes: > Hello, I'm just about ready to finish the underside of my new > soundboard. Should I avoid finishing the surround area (where it's > going to get glued to the rim)? Is it better to finish both sides at > the almost same time ? Is it safe to finish the top side "before > gluing the bridges" or should I finish the underside, then glue the > bridges, then the board to the rim and then only finish the top ?? > > Many questions but I prefer to ask before than after. > > Thanks > > Marcel > > I've never done a new board before, but it would seem to me that you would want to glue bridges and ribs to raw wood, instead of finished wood, for a more solid adhesion. Just my thoughts on the matter. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/99/c5/cc/0f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC