Bill Ballard wrote: > > At 5:08 PM +0100 12/14/02, Richard Brekne wrote: > >Not knowing the exact size... doesnt Schaff sell some small hinge mounts > >with plastic bushing inserts ? Fits the usual 146 pins. > > Are you referring to the #2582? The pedal mounts for vertical? It's > the lever whose pivot hole is bunged out, not the mounting blocks. > There would also be the matter of the pivot's height above the > mounts' base. > Ah... In the lever itself.. sorry didnt pick up on that... I was thinking you could just take out the plastic bushings and insert them into your own situation... but I guess not. > So fa,r the best idea is to convert to a wooden hole sized for a good > "push/press" fit. > > Bill Ballard RPT > NH Chapter, P.T.G. > > "May you work on interesting pianos." > ...........Ancient Chinese Proverb > +++++++++++++++++++++ > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC