---------------------- multipart/alternative attachment > >3. Anything else to try? (Bridge and everything else 'looks' fine.) > >Alan Barnard Hi Alan, Try tapping the bridge pins, they are probably are probably loose. Use a hammer shank or a pin set punch, just be careful with the hammer. The rock hard hammers need deep needling on the shoulders, or a generous dose of steam. if you are inexperienced at voicing, find some one to help you. Regards Roger ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/7b/89/b3/e0/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC