In a message dated Sat, 3 Aug 2002 2:12:45 PM Eastern Standard Time, cmpiano@attbi.com writes: > > > When stringing- count the number of notes for the new size. Then put a punching on the next note. Put it on the pin closest to the capo bar, not the one closest to the keyboard. If you don't you may put an extra loop of wire on the other > two pins before you wake up. Bummer! Don't ask. > > Carl Meyer Assoc. PTG > Santa Clara, California > cmpiano@attbi.com Carl, good idea, I use golf tees marked with wire sizes on the top and dropped in the pin hole. That way I can't string that hole without removing the tee and hopefully paying attention to the wire change (don't you ask either). David Koelzer Vintage Pianos DFW
This PTG archive page provided courtesy of Moy Piano Service, LLC