At 11:13 AM 4/12/2002 +0200, you wrote: >Newton Hunt wrote: > > > Richard, > > > > The height of the hammer center pin to the keybed was left out. String > > height minus hammer center pin height equals bore distance. If those > > specs are correct then you do indeed have a problem. > > > >Ah... grin.. yes... Forgot to measure that didnt I. Ok... coming up !! :) > > > > > 10 mm knuckles is correct. 11 mm is not correct. Well, optimum anyway. > > > > Newton The figures you need to ask the man'f'r are: String to hammer center distance String to wippen flange center distance These are the action elevation specs which would help in your diagnosis. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@attbi.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC