Suspect.... a Petrof 235 grand...serial 430019. --Hammers and shanks have been changed at some point, --regulates at present with drop screws way up... have had to grind several in order to keep from breaking them on the underside of the pin block. --Letoff button has plenty of room to go up, but its on the high side. --a 90 degree rake and shank parallel to strings would necessitate shortning the borelength... hmmmm. --present rake is 90 degrees, borelengths of 56 / 63 So.... grin... Name That Problem !! :) -- Richard Brekne RPT, N.P.T.F. Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC