RE; Steinway hammer alignment

[Kevin E. Ramsey]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
    ".  If you need to=20
space 60 flanges, count on an hour's time.  You will also need to =
reshape the=20
hammers, so add that time,too.=20
   How centered are the drop screws hitting their leather pads? "

    Hey, gang! If you have to recenter 60, out of 88 flanges, it's time =
to move the whole action, probably by shimming the stop block. (Unless, =
for some reason, the hammers are off to the left on the whippens).=20
    Let's work smarter, not harder.




Kevin Ramsey
ramsey@extremezone.com

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8c/f1/4d/54/attachment.htm

---------------------- multipart/alternative attachment--