Hi Cal, This about the time frame when Yamaha was having some plating problems with centre pins. Remove a few and examine carefully under a bright light with a magnifing glass. If that is the problem, ream out the bushing cloth several sizes, and repin. Better yet replace the flanges. Regards Roger At 09:00 PM 11/12/01 -0500, you wrote: >List, > > I have noticed that sometimes Yamaha grand hammer flanges become very >sluggish after filing or sometimes just lifting them to their furthest >point of travel seems to do it. I've seen this only on the older ones, >say from around the 70's. Does anyone out there know what is causing >this? > >Cal Munson, >Ann Arbor MI > >. > > Roger Jolly Balwin Yamaha Piano Centres. Saskatoon/Regina. Canada.
This PTG archive page provided courtesy of Moy Piano Service, LLC