---------------------- multipart/alternative attachment On Thursday, November 1, 2001, at 07:03 PM, Wimblees@AOL.COM wrote: > > My dad told me he used an umbrella stay. He said you can push it > through the hole with the damper wire still in place. I tried it once > and pushed the bushing out. > > Wim > Ah yes, that's the "traditional" one that I first "learned" -- with about the same result as you found. Looks like some variation of the "soldering iron/back check wire or bridge pin" technique will be the way to go (and checking the bending as Ron suggested). Thanks, Patrick ---------------------- multipart/alternative attachment A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 765 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/74/c6/09/52/attachment.bin ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC