---------------------- multipart/alternative attachment Is the let-off too close? Or the repetition lever upstop screw adjusted to close? If they are, then once the string is struck and is oscillating, the hammer will be brought to within the envelope of this undulation upon repetition or repetition lever lift after check-in. Also, if the wippen assist springs are too high, that will cause problems as well. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@mediaone.net http://www.stanwoodpiano.com PS note: former address is once again activated but the one with <2001> is valid as well. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/dc/18/18/d7/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC