Victor.... Forgot to tell you....the hammers should not be resting on the rail at rest. Could be that adjusting the hammer height/blow distance by regulating it by turning the screw or whatever means is provided on the end of the keys. Do this FIRST. Dick MT ----- Original Message ----- From: victor belanger <vbela@MIT.EDU> To: <pianotech@ptg.org> Sent: Tuesday, October 30, 2001 8:27 AM Subject: Bouncing hammers. > Hello all, > Thanks. > > Regards. > > Victor >
This PTG archive page provided courtesy of Moy Piano Service, LLC