M&H console/damper spoon problem

[Robert Moffatt]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
You might try a small turn buckle. One end secured to the top of the =
action
bracket, the other end to the damper lift rod. Same thing as below..but =
solid,
not likely to move during the procedure.

Bob Moffatt
Calgary, Alberta
Canada

  ----- Original Message -----=20
  From: Billbrpt@AOL.COM=20
  To: pianotech@ptg.org=20
  Sent: Wednesday, May 02, 2001 12:45 PM
  Subject: Re: M&H console/damper spoon problem




  I'd only recommend the "quick & dirty" method for an occasional =
adjustment=20
  Put the wedge in more or pull it out to find this=20
  exact spot.=20



  Bill Bremmer RPT=20
  Madison, Wisconsin=20

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8e/9d/0e/14/attachment.htm

---------------------- multipart/alternative attachment--