Hi , Does the top of the 7 part of the wire fit into the hammer butt? Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: <kam544@flash.net> To: <pianotech@ptg.org> Sent: Friday, June 22, 2001 10:46 AM Subject: Re: 1902 Conover upright jack lever > >...Is the piece shaped like 7 or more like ]? The latter suggests a class > >of actions with articulated jacks... > >Clark > > Clark, LIst, > > It is shaped like an upside down' 'L' wire (that's mighty close to a 7 > shape). It is mounted into the top of the jack by means of the following > description. > > The tip of the jack is very large and extends beyond the hammer butt > providing a platform for the mounting of this wire. When the jack is at > rest, the wire inserts itself into a neatly engineered hole in the hammer > butt. > > This one Conover Upright design is merely a masterful approach to allow the > action to be removed without the wippens falling away from the hammer > butts. It eliminates the need for any bridle strap/wire apparatus for this > specific purpose. That's all. > > > Is there a hammer spring? > > Yes, there are hammer return springs in this piano. > > As to the rest of your post, while very interesting, I can't envision any > similarities in design and/or purpose of this particular Conover feature to > the ones you described. > > Keith McGavern > Registered Piano Technician > Oklahoma Chapter 731 > Piano Technicians Guild > USA >
This PTG archive page provided courtesy of Moy Piano Service, LLC