Agreed. I use a slow grinder I got from Woodcraft, turns at half the usual speed of a grinder. Use compounds or rouges from Lowe's or any place. Wally Wilson, RPT At 04:18 PM 6/12/01 -0400, you wrote: >Hit 'em with the buffing wheel. Zoom, zoom, they are done, bright and >beautiful in just a few minutes. Spray with laquer and presto! I always do >all my brass. It is so easy with a good wheel. I use the buffing supplies >from Pianotek. I stick the wheel on my shop smith. > >----- Original Message ----- >From: "phil frankenberg" <rinkyd@pacbell.net> >To: <pianotech@ptg.org> >Sent: Tuesday, June 12, 2001 8:24 AM >Subject: Brass finishing > > >> How do you go about cleaning, polishing and finishing brass hinges? >> Thanks >> >> Phil Frankenberg >> Chico Ca. >> >> >
This PTG archive page provided courtesy of Moy Piano Service, LLC