Farrell wrote: > Take a compression-crowned soundboard that is not collapsed (still has some > crown) that also has a few cracks through which you can see daylight. How > can this be? The only thing that gives the board crown is the lateral > compression across the grain as the wood gained moisture after its initial > drying during construction. Now if you have daylight cracks in the board, > does this not mean the board is not under compressional forces? Or is it > that the inter-crack areas are still under compression from being glued to > the non-dimensionally changing ribs (relatively speaking)? But then why/how > is it that one area of the board can be under compression and an inch or two > away, the board is under tension???????? > > What is it about the soundboard that is soooooooooo interesting? Or is my > life just that dull? > Smile.... from the sound of your recent array of posts I doubt seriously its the later. > > Terry Farrell -- Richard Brekne RPT, N.P.T.F. Bergen, Norway mailto:rbrekne@broadpark.no
This PTG archive page provided courtesy of Moy Piano Service, LLC