The machine won't auto step the sequence. You must either move it manually by pushing the note up to get you through the sequence, or note down to go back through the sequence. You can also use the foot switch. Once you are through the sequence you can go to auto step to move chromatically up or down. David Love ----- Original Message ----- From: "Phil Ryan" <pryan2@the-beach.net> To: <pianotech@ptg.org> Sent: July 31, 2001 5:49 AM Subject: SAT III Question > I'm trying to use the sequencing feature on the machine to follow the order > of a temperament. I follow the directions in the manual to store the > sequence, but when I go to USE the sequence, nothing happens. > > I load the page for the piano then I load the sequence number (SE 2), which > I have stored previously, then the auto note stepping, but nothing happens. > The machine changes notes only chromatically as is normal. What am I doing > wrong? Is there a way to view the programmed sequence order manually to > see if they are stored correctly? Can SE 1(Baldassin-Sanderson Tempermant) > be erased accidentally? Any help would be appreciated. > > Phil Ryan > Miami Beach, FL >
This PTG archive page provided courtesy of Moy Piano Service, LLC