PVC-E

David M. Porritt dporritt@post.cis.smu.edu
Mon, 02 Jul 2001 10:50:54 -0500


---------------------- multipart/alternative attachment
Last year I did some experimenting with gluing felt to wood.  I was happy=
 enough with the results to use PVC-E for some key bushings instead of hide=
 glue.  It worked well.  Today I removed the bushings to install new ones,=
 and they came out SO much faster and better than hide glue.  The wood of=
 the mortice didn't splinter, and the sides of the mortices were very clean=
 (no red fuzzy glue remaining).  

Just in case I'm not the last one to do this I thought I'd pass it on.

dave


David M. Porritt
dporritt@swbell.net
Meadows School of the Arts
Southern Methodist University
Dallas, TX 75275


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0a/3a/43/94/attachment.htm

---------------------- multipart/alternative attachment--



This PTG archive page provided courtesy of Moy Piano Service, LLC